Plumbing repairs and installs throughout Mission, KS — licensed, insured, and straight with you about what it needs.
The full range of residential plumbing, water and sewer work.
The main water line between the meter or well and your Mission home repaired or replaced, including trenching and restoration.
Hard water, iron staining and sulfur smell are three different problems in Mission and need three different systems.
Primary pump plus battery backup installed in Mission, tested by filling the pit before we leave.
Grease, roots or a broken section — the Mission drain gets cleared and you find out which one it was.
No hot water in Mission? Most units under eight years old are worth repairing and we will tell you when yours is not.
Main sewer line breaks in Mission camera-inspected first, then spot repaired or replaced, trenchless where depth allows.
Most humming disposals in Mission are a jam, not a dead motor. We check that before selling you a new unit.
Failing galvanized, polybutylene and corroded copper in Mission replaced with new copper or PEX, room by room.
Burst pipes, sewage backups and no-water calls in Mission answered around the clock, starting with getting your main shutoff closed.
Dripping faucets, worn shower valves and sink or tub fixtures repaired or replaced across Mission.
Hidden leaks under slabs, inside walls and out in the yard, found with pressure tests and listening gear before anything is opened.
Burst and frozen pipes in Mission handled start to finish — shutoff, cutout, repair, pressure test and closed back up.
Submersible and jet pump replacement for Mission area wells, with the pressure set correctly before we go.
A toilet that runs all night can add real money to a Mission water bill. Most are a rebuild, not a replacement.
Gas leaks located and repaired in Mission, plus new lines run to ranges, dryers, water heaters and grills.
Mission runs on a mix of housing stock — a core of older homes on original supply lines and newer streets on PEX and plastic drain. With about 30,617 residents, the calls coming out of Mission split almost evenly between things that broke and things that were never installed right.
A plumber working Mission, Kansas needs to be comfortable with both. The same week can bring a polybutylene repipe on one street and a tankless descale on another, and you cannot do either well if you only know the trade from one era.
Why homeowners keep the number after the first job.
This started as two people and a truck in 1998 and grew on water, sewer and drain work. Nearly three decades in one trade, not a franchise name bought off a shelf last year.
Drop cloths go down, cuts get made clean so the patch is easy, and the old tank or fixture leaves with the truck. The room should look better than we found it.
Sewer and drain problems get a camera down the line first, and you see the screen. Nobody trenches a yard on a guess when a fifteen minute look will show the break.
Told you need a full repipe or a new sewer line? Get it looked at again. Sometimes it is a smaller fix, and sometimes we confirm the first plumber was right so you can spend with confidence.
Burst pipes and sewage backups do not wait for business hours. The phone is answered at night and on weekends, and the first thing you get is help finding your shutoff.
What you probably want to know before you book.
Yes, and it starts with an actual water test rather than a guess. Hardness, iron and sulfur all need different equipment, so the Mission system gets sized off what is really in your water.
Almost always. A cable machine or hydro jet goes in through an existing cleanout and clears the line from there. In Mission the camera goes down afterward so you can see whether it was grease, roots or a broken section.
Yes — well pumps, pressure tanks and pressure switches are regular work. Short cycling, no pressure and a pump that will not shut off are the three most common calls we take from well owners near Mission.
That is the classic hidden leak — usually a slab leak, an underground service line, or a toilet flapper passing water quietly all night. A Mission leak detection visit puts a pressure gauge on the system and finds it without digging up the yard first.
Yes. Every Mission job goes to a licensed, insured plumbing contractor who pulls the permits your municipality requires. Licence numbers are on the invoice and available before the truck rolls.
You get a price for the repair before any work starts, not an hourly meter that runs while you watch. The diagnostic visit in Mission is quoted up front on the phone, and if you approve the repair that visit charge goes toward the job.
The work speaks, but so do the people who paid for it.
"Got a quote elsewhere for a full repipe at five figures. Second opinion here found two bad sections and a pressure regulator. Cost me a fraction of the first number."
"Tankless unit was throwing an error code every other shower. Descaled it, replaced a sensor, walked me through the yearly flush so I can do it myself."
"Kitchen remodel plumbing, sink and disposal and the dishwasher line. Coordinated with my cabinet guy without me having to run messages between them."
Plumbing service in the communities nearby.